• Irrigation
• Water treatment
• Livestock
• Construction
• Mining
• Industrial
• Civil water supply

Features
A small expansion chamber is built in the pump body allowing the separation of the air-water mixture while priming.  The suction of the pump is equipped with an incorporated non-return valve preventing the pump from emptying, once it is stopped.

The multi-blade open impellers allow the flow even of solid particles (diameter 6-25mm).
Mechanical seal with wear-resistant faces ensures a long pump life.
In the standard versions all casted parts are made of high quality fine grain grey cast-iron.

MEA series - Monobloc with electric motor Directly coupled to an electric motor and supplied as a monobloc unit.   The pump shaft is an extension of the motor shaft and is supported by oil less ball bearings. The electric motor is closed and externally ventilated, with IP55 protection, insulation class F, and complies with IEC norms.
TA series - Tractor PTO Pumps with Gearbox Driven through cardan shaft. The pump is connected to the gearbox, and helicoidal gears (available with various ratios) are supported by oil lubricated ball bearings. Water circulation cooling system provides greater safety and longer life of the overgear mechanical parts.
SA series - With support for operating through Engine and/or Electric Motor Can be driven either by electric motor of flanged engine. Coupling is made through elastic joint and, on some models, through a pulley. The pump is mounted on a sturdy support lodging the shaft and the oil bath ball bearings (that support axial and radial thrusts, if any).
FA & FLA series - For Flanged Coupling to engines equipped with SAE housing or with special flanges Driven only by flanged engine. Direct coupling can be made to engines with both SAE and special flanges. The pump is closed-coupled to the engine and forms a monobloc.  This allows an easy installation and a perfect and long-lasting alignment. The pump is supplied with the shaft fitted for rigid connection to the engine flywheel.
SERIES MAX. CAPACITY MAX. HEAD MAX. POWER MAX Ø OF SOLIDS PDF m³/h l/min kW Hp MEA 120 2000 75 m 22 30 25 mm TA 168 2800 47 m 26 35 25 mm SA 156 2600 70 m 30 40 25 mm FA - FLA 156 2600 70 m 30 40 25 mm